CTRL library / LEDs

LED methods

There are two ways to instantiate an LED:

• CtrlLed(sig, maxBrightness): Creates an LED in PWM mode for brightness control on a PWM-capable pin.
• CtrlLed(sig): Creates an LED in digital mode for simple on/off control on any pin.

Core

• turnOn(): Turns on the LED.
• turnOff(): Turns off the LED.
• toggle(): Toggles the LED's off/on status.
• set(true): Turns the LED on (true) or off (false), e.g. led.set(button.isPressed());

Brightness (PWM mode)

• setMaxBrightness(255): Sets the maximum brightness of the LED, for calibration purposes (0 - 255). PWM mode only.
• setBrightness(100): Sets the brightness of the LED in percentages (0 - 100). PWM mode only.
• getMaxBrightness(): Returns the maximum brightness set for the LED.
• getBrightness(): Returns the brightness of the LED.

State

• isOn(): Checks if the LED is turned on.
• isOff(): Checks if the LED is turned off.
• isPwmMode(): Checks if the LED is in PWM mode. Returns true if the LED is on a PWM-capable pin, false if in digital mode.
• isEnabled(): Checks if the LED is enabled.
• isDisabled(): Checks if the LED is disabled.
• enable(): Enables the LED.
• disable(): Disables the LED.