Machines / Traktor Beam
Traktor Beam
A MIDI controller for Traktor Pro, with every deck, loop and effect under your fingers.
Traktor Beam is a MIDI controller built for Traktor Pro DJs. Four-deck switching, dedicated loop and beat jump sections, two FX banks and nine analog knobs put every control you need under your fingers.
A 600 MHz processor sends USB and 5-pin DIN MIDI at once. Three OLED displays show your active deck, loop size and move mode as you play.
Remap any MIDI assignment on the controller itself. It is saved in onboard memory, so your setup goes where you go.
Route the FX banks to external gear over DIN MIDI, control Traktor stems, or add a foot switch for hands-free tricks. Any button or knob sends the MIDI command you give it.
How it plays
Built for Traktor Pro
Native four-deck support, loop and move controls, and deep FX integration, ready the moment you plug it in.
Two MIDI outputs at once
USB MIDI to Traktor and 5-pin DIN MIDI to external synths, drum machines or effects, with channel routing per bank.
Remap it on the device
Give any button, knob or encoder a new MIDI message from the built-in menu. Every change is stored in EEPROM.
Three OLED displays
Three 128 x 64 screens show the deck and menu, loop size and beat jump mode, so your eyes stay on the decks.
Specifications
| Processing | |
|---|---|
| Processor | ARM Cortex-M7 (@ 600 MHz) |
| Connectivity | |
| MIDI over USB | USB MIDI (input and output), class-compliant, driverless |
| MIDI over DIN | 5-pin DIN MIDI (input and output), channel routing 1 to 16 |
| MIDI messages | Note On/Off, Control Change, Program Change |
| MIDI channels | 16; four-deck mode on channels 1 to 4 (Traktor decks A to D) |
| Pedal input | Foot switch or sustain pedal jack with configurable MIDI output |
| Connections | USB (power and MIDI), 5-pin DIN MIDI, pedal jack |
| Interface | |
| Displays | 3x 128 x 64 OLED: menu, loop size, move/beat jump |
| Buttons | 38 standalone and 1 dual-action (short and long press) |
| Rotary encoders | 4 in total: 1 menu encoder and 3 assignable (Loop Size, Move Mode, Tree/List) |
| Potentiometers | 9 analog knobs |
| LEDs | 24 individually driven LEDs, 3 brightness levels |
| Total controls | 53+ physical controls (40 buttons and switches, 4 encoders, 9 pots) |
| System | |
| FX banks | 2 independent banks (5 and 6 buttons), each routable to USB or DIN MIDI |
| FX bank 2 modes | FX mode and Stems mode |
| Storage | EEPROM for MIDI mappings, brightness and FX routing |
| Menu | 12-page on-device menu: deck, brightness, MIDI monitor, assign and reset, FX routing, pedal |
A question about Traktor Beam, or an idea for it? Send an email.